喀斯特洞穴晶体生长速率的古气候重建意义

为了从石笋中提取更多的古气候信息,以用于气候预测,需要研究现代洞穴沉积过程与周围环境变化的关系。本文通过对贵州5个洞穴现代沉积玻片上菱形方解石的长度与滴水变率观测研究发现,在洞穴滴水不间断的情况下,滴水变率较小的滴水点,菱形方解石晶体长轴生长速率较快,反之,生长速率较慢。反映在石笋中,石笋晶体粒径较大说明处于降水稳定时期,石笋晶体粒径较小指示沉积时期降水变率较大,气候不稳定。     

利用电石渣制备多种晶形碳酸钙的研究

为了有效地利用电石渣资源,研究用电石渣为原料制备球形、板状形、针叶形碳酸钙.利用DTA-TG、SEM等研究了电石渣的预处理方式对碳酸钙纯度的影响和碳化反应温度、CO₂流量等对多晶型碳酸钙形成的影响.结果表明:电石渣可直接与氯化铵反应,当pH>7时,合成的碳酸钙的纯度大于97%,白度大于98.电石渣经过处理后,在不同的碳化反应温度及合适的CO₂流量的条件下分别可以得到球形、板状形、针叶形的碳酸钙.     

Effect of cycle time on biodegradation of azo dye in sequencing batch reactor

The effects of cycle time on the biodegradation of the azo dye remazol brilliant violet 5R (RBV-5R) were investigated in an anaerobic–aerobic sequencing batch reactor (SBR). System performance was determined by monitoring chemical oxygen demand (COD), color, anaerobic enzyme (azo reductase) and aerobic enzyme (catechol 2,3-dioxygenase), and aromatic amine concentration. SBR was operated in three different total cycle times (48 h, 24 h and 12 h), fed with a synthetic textile wastewater. In this study, the anaerobic period of SBR was found to allow the reductive decolorization of azo dye and the aerobic period was found to be effective on further COD removal after the anaerobic period. The percentage reductions in color by the anaerobic stage of the SBR were at 72%, 89% and 86% for the 24-h, 12-h and 6-h cycle times, respectively. Total COD removal efficiencies were over 75% for all operational conditions and about 70% of the COD removal was achieved in the first 3 h of anaerobic stages. During the decolorization of RBV-5R, two sulfonated aromatic amines (benzene-based and naphthalene-based) were formed and detected by HPLC. Aerobic phases of SBR with total cycle times of 48 h, 24 h and 12 h were able to remove benzene-based aromatic amines with removal efficiency of 64%, 92% and 89%, respectively. The results indicated that the best SBR performance in terms of color removal and aromatic amine degradation was achieved from total cycle time of 24 h.     

加热工艺对微合金钢Ti、Nb固溶及奥氏体晶粒长大的影响

研究含Ti、Nb微合金钢HJ58轧制前不同加热温度和保温时间对Ti、Nb固溶量及奥氏体晶粒尺寸的影响规律,讨论微合金元素Ti、Nb的存在状态及作用机理,提出了合理的加热工艺以指导生产。     

Liquid crystallinity of levan/water/starch solutions

Transmitted light measurements performed with a UV-visible spectrophotometer were used to characterize how starch affects the position of boundaries on the phase diagram for dilute aqueous solutions of levan (a branched polymer of fructose). Data were collected in the range 15 to 70°C; the minimum concentrations required for separation of a nematic phase and the minimum concentration required for a fully nematic solution were identified within this range. While hard interactions (repulsion between rod-like molecular segments) dictate the formation of a liquid crystalline phase at and above ambient temperature in the absence of starch, soft interactions become more significant as solutions are cooled toward ambient when starch is present. Small amounts of starch might be used as a filler to modify the mechanical properties (while retaining the process-related benefits) of levan films cast from liquid crystalline solution.     

污泥烧结轻骨料调质影响研究

研究了污泥添加不同比例的SiO₂,Al₂O₃,CaCO₃和Na₂CO₃后的烧结体建材性能,并从晶体相反应机理角度讨论了添加剂改变烧结体建材性能的作用机理.结果表明,添加硅、铝能显著提高烧结体的抗压强度,硅是玻璃体成陶组分,对提高烧结体的抗压强度主要发挥物理作用;铝主要与污泥中的磷反应生成类似石英结构的AlPO₄高强晶体. 添加钠能增加烧结体的熔融液相,降低烧结体的吸水率,但烧结体变脆抗压强度降低. 添加钙增大吸水率,降低抗压强度. 此外,硅、铝会导致烧结体烧结温度提高,钠则能显著降低烧结温度.      

Assessment of toxic metals in waste personal computers

Considering the enormous production of waste personal computers nowadays, it is obvious that the study of their composition is necessary in order to regulate their management and prevent any environmental contamination caused by their inappropriate disposal. This study aimed at determining the toxic metals content of motherboards (printed circuit boards), monitor glass and monitor plastic housing of two Cathode Ray Tube (CRT) monitors, three Liquid Crystal Display (LCD) monitors, one LCD touch screen monitor and six motherboards, all of which were discarded. In addition, concentrations of chromium (Cr), cadmium (Cd), lead (Pb) and mercury (Hg) were compared with the respective limits set by the RoHS 2002/95/EC Directive, that was recently renewed by the 2012/19/EU recast, in order to verify manufacturers’ compliance with the regulation. The research included disassembly, pulverization, digestion and chemical analyses of all the aforementioned devices. The toxic metals content of all samples was determined using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results demonstrated that concentrations of Pb in motherboards and funnel glass of devices with release dates before 2006, that is when the RoHS Directive came into force, exceeded the permissible limit. In general, except from Pb, higher metal concentrations were detected in motherboards in comparison with plastic housing and glass samples. Finally, the results of this work were encouraging, since concentrations of metals referred in the RoHS Directive were found in lower levels than the legislative limits.     

高浓度液晶废水处理研究

针对某化工厂液晶中间体生产废水,采用Fenton预处理+水解酸化+好氧+超滤反渗透工艺进行处理,发现Fenton技术具有良好的预处理效果,对COD的去除率在50%左右,且废水可生化性从原水的0.05提高至0.38,经过水解酸化及好氧单元的降解,废水ρ(COD)可降至150~200 mg/L,再通过超滤反渗透膜处理,COD浓度可降至50mg/L以下,达到GB/T 19923—2005《城市污水再生利用—工业用水水质》要求,出水可用作稀释水或厂内冷却用水。膜浓水通过自主研发的强化蒸发装置处理,可实现废水不外排。采用该工艺对厂内实际生产废水进行现场调试运行,处理规模为5 m~3/d,原水初始pH值为2.0~4.5,ρ(COD)为7 000~10 000 mg/L。稳定运行后,生化段出水pH值为7.5~8.0;ρ(COD)为150~200 mg/L,膜处理后ρ(COD)<50 mg/L,证明运行稳定可靠。     

AEO-7改性PbO2电极电催化降解结晶紫

通过在镀液中添加表面活性剂AEO-7,以不锈钢为基体,利用阳极氧化法制备了改性PbO2电极.同时,在结晶紫模拟废水中对比了改性前后PbO2电极的阳极极化曲线和塔菲尔曲线,并对质量浓度为10 mg·L-1的结晶紫模拟废水进行了电催化降解实验.实验结果表明,制备的改性PbO2电极对结晶紫废水的降解显示出了较好的电催化活性,最佳电解实验条件为:电解电流密度30 mA·cm-2,支持电解质Na2SO4浓度5g·L-1,处理温度35℃,在此条件下电解40 min后,结晶紫的去除率可达到90％以上.     

Effect of Sb dopant amount on the structure and electrocatalytic capability of Ti/Sb-SnO2 electrodes in the oxidation of 4-chlorophenol

Ti/Sb-SnO_2 anodes were prepared by thermal decomposition to examine the influence',of the amount of Sb dopant on the structure and electrocatalytic capability of the electrodes in the oxidation of 4-chlorophenol.The physicochemical properties of the Sb-SnO_2 coating were markedly influenced by different amounts of Sb dopant.The electrodes,which contained 5% Sb dopant in the coating, presented a much more homogenous surface and much smaller mud-cracks,compared with Ti/Sb-SnO_2 electrodes containing 10% or 15% Sb dopant,which exibited larger mud cracks and pores on the surface.However,the main microstructure remained unchanged with the addition of the Sb dopant.No new crystal phase was observed by X-ray diffraction(XRD).The electrochemical oxidation of 4-chlorophenol on the Ti/SnO_2 electrode with 5% Sb dopant was inclined to electrochemical combustion;while for those containing more Sb dopant,intermediate species were accumulated.The electrodes with 5% Sb dopant showed the highest efficiency in the bulk electrolysis of 4-chlorophenol at a current density of 20 mA/cm~2 for 180 min;and the removal rates of 4-chlorophenol and COD were 51.0% and 48.9%,respectively.